Hydra Digit is the LGF electronic double mitre saw for wide profiles, with sawblades up to 530 mm and cutting to size regardless of profile height.
Part of the Hydra family – compare all versions.
Advantages
- For wide profiles
- Cutting to length regardless of the profile height
- Motorised head displacement, controlled by the positioner
- Ø 500–530 mm sawblades
- Vertical and horizontal clamps, central support and roller conveyor included
- Cutting lists via USB
Technical data
- Machine equipped with electronic positioner c/w monochrome screen 120×40 mm and industrial integrated keyboard
- Right head displacement by means of electronic positioner
- Full protection of the sawblades by means of safety hoods with automatic closing
- Sliding of the moving head by means of recirculating ball bearings on rectified and tempered guides
- USB port to store/upload of cutting lists and programs
- Variable length cutting procedure independently from the profile height
- Pneumatic heads tilting at 90° / -45°
- Possibility to mount sawblades with Ø 500 – 530 mm
- 2,2 Kw (3 HP) 3 phase motors – 2800 r.p.m.
- Sawblade shaft Ø 30 mm
- Cutting lengths 4000/5000 mm
- Working pressure 7 bar
- overall dimensions 555-655x160x144 cm
- Weight 1800 – 1950 Kg
Standard equipment
- Nr. 2 TCT sawblades Ø 500 mm
- Nr. 2 vertical pneumatic clamps
- Nr. 2 horizontal pneumatic clamps
- USB flash drive
- Central pneumatic support
- Right head in feed roller conveyor
- Automatic lubrication by means of nebulizer
- Air filter
- Air gun
- Service spanners
On request
- Nr 2 additional vertical pneumatic clamps
- Electronic positioner "POWER 1000", c/w 10" color monitor and touch screen system
- Over size cut device
- Corner cleat cutting device
- Slug cut device
- Reduced cut device
- Vee notch device for PVC profiles
- Micro-spray nebulizer device
Other machines in the same category
LGF Gamma Swing Digit Plus
Gamma Swing Digit Plus is the LGF double mitre saw with 3 controlled axes: head tilting is motorised, from 22.5° to −45° and any intermediate angle.
LGF Gamma Digit Plus
Gamma Digit Plus is the LGF double mitre saw with 3 controlled axes, with motorised head tilting from 22.5° to 90° and any intermediate angle.
LGF Gamma Swing Digit
Gamma Swing Digit is the LGF electronic double mitre saw with pneumatic tilting in both directions: 90° / +45° / −45°, for bars up to 6 m.
LGF Gamma Digit Special
Gamma Digit Special is the LGF electronic double mitre saw with pneumatic tilting at 90° / +45° / +22.5° and a positioner with 10″ touch screen.