Gamma Digit Plus is the LGF double mitre saw with 3 controlled axes, with motorised head tilting from 22.5° to 90° and any intermediate angle.
Part of the Gamma family – compare all versions.
Advantages
- Motorised head tilting from 22.5° to 90°, at any angle
- Electronic positioner with 10″ touch screen
- Cutting lists via USB
- Full sawblade protection
- Cutting length up to 6,000 mm
- TCT sawblades Ø 530 mm included
Technical data
- Machine equipped with electronic positioner, c/w 10" color screen and touch screen system
- USB port to store/upload of cutting list
- Full protection of the sawblades by means of safety hoods with automatic closing
- Right head displacement by means of electronic positioner
- Sliding of the moving head by means of recirculating ball bearings on rectified and tempered guides
- Radial sliding of the sawing carriage
- Controlled and motorized heads tilting from 22,5° to 90° and any intermediate degrees
- Possibility to mount sawblades Ø 500 – 530 – 550 mm
- 2,2 Kw (3 Hp) 3 phase – 2800 r.p.m.
- Sawblade shaft Ø 30 mm
- Cutting lengths 4000/5000/6000 mm
- Working pressure 7 bar
- Overall dimensions 533-633-733x139x196 cm
- Weight 1200 – 1350 – 1500 Kg
Standard equipment
- Nr 2 TCT sawblades Ø 530 mm
- Nr 4 horizontal pneumatic clamps
- USB flash drive
- Automatic lubrication by means of nebulizer
- Air filter
- Air gun
- Service spanners
On request
- Vertical clamps kit (1 cylinder/head, tot. 2 cylinders)
- Vertical clamps double kit (2 cylinders/head, tot. 4 cylinders)
- Turning vertical clamps kit
- Central pneumatic support
- Right head infeed roller conveyor
- Automatic reduced cut device c/w in feed roller conveyor
- Over size cut device
- Corner cleat cutting device
- Vee notch device for PVC profiles
- Sequential cut device
- Profile height electronic caliber
- Micro-spray nebulizing device
- Profile height electronic caliber
- Pneumatic support for long bars
- Ethernet connection plug
- Bar code label printer
Other machines in the same category
LGF Gamma Swing Digit
Gamma Swing Digit is the LGF electronic double mitre saw with pneumatic tilting in both directions: 90° / +45° / −45°, for bars up to 6 m.
LGF Gamma Digit Special
Gamma Digit Special is the LGF electronic double mitre saw with pneumatic tilting at 90° / +45° / +22.5° and a positioner with 10″ touch screen.
LGF Gamma Digit
Gamma Digit is the LGF electronic double mitre saw with pneumatic tilting at 90° / +45°, for bars up to 6 m, with 10″ touch screen.
LGF Atlas Digit / Atlas MX
Atlas is the LGF double mitre saw in two versions: Atlas Digit, with electronic positioner, and Atlas MX, semi-automatic, with head displacement by hand wheel.