Gamma Swing Digit is the LGF electronic double mitre saw with pneumatic tilting in both directions: 90° / +45° / −45°, for bars up to 6 m.
Part of the Gamma family – compare all versions.
Advantages
- Pneumatic head tilting at 90° / +45° / −45°
- Electronic positioner with 10″ touch screen
- Cutting lists via USB
- Full sawblade protection
- Cutting length up to 6,000 mm
- Hardened and ground guides, recirculating ball bearings
Technical data
- Machine equipped with electronic positioner, c/w 10" color screen and touch screen system
- USB port to store/upload of cutting list
- Full protection of the sawblades by means of safety hoods with automatic closing
- Right head displacement by means of electronic positioner
- Sliding of the moving head by means of recirculating ball bearings on rectified and tempered guides
- Radial sliding of the sawing carriage
- Pneumatic heads tilting at 90°/45°/-45°
- Possibility to mount sawblades Ø 500 – 530 – 550 mm
- Sawblade shaft Ø 30 mm
- 2,2 Kw (3 Hp) 3 phase – 2800 r.p.m.
- Cutting lengths 4000/5000/6000 mm
- Working pressure 7 bar
- Overall dimensions 533-633-733x139x196 cm
- Weight 1200 – 1350 – 1500 Kg
Standard equipment
- Nr 2 TCT sawblades Ø 530 mm
- Nr 4 horizontal pneumatic clamps
- USB flash drive
- Automatic lubrication by means of nebulizer
- Air filter
- Air gun
- Service spanners
On request
- Turning vertical clamps kit
- Pneumatic central support
- Right head infeed roller conveyor
- Automatic reduced cut device
- Over size cut device
- Corner cleat cutting device
- Sequential cut device
- Vee notch device for PVC profiles
- Micro-spray nebulizing device
- Pneumatic support for long bars
- Ethernet connection plug
- Bar code label printer
Other machines in the same category
LGF Gamma Digit Special
Gamma Digit Special is the LGF electronic double mitre saw with pneumatic tilting at 90° / +45° / +22.5° and a positioner with 10″ touch screen.
LGF Gamma Digit
Gamma Digit is the LGF electronic double mitre saw with pneumatic tilting at 90° / +45°, for bars up to 6 m, with 10″ touch screen.
LGF Atlas Digit / Atlas MX
Atlas is the LGF double mitre saw in two versions: Atlas Digit, with electronic positioner, and Atlas MX, semi-automatic, with head displacement by hand wheel.
LGF Delta Swing Digit
Delta Swing Digit is the compact LGF electronic double mitre saw, with 400 mm sawblades and pneumatic tilting at −45° / 90° / +45°.